Accu-Drill MD

The Accu-Drill MD10 Manual Hole Driller is capable of drilling and skiving precise holes in plastic, silicone and steel braided medical tubing. It is intended for use in R&D environments and low volume manufacturing. It may also be configured to punch holes. The Accu-Drill MD10 is a one axis (Z-axis) machine with a motorized drill, and can be configured with up to three axes.

Key Features

  • Hollow spindle allows for the use of an ejector pin to remove plugs from drills

  • Automatic hole plug ejection keeps drills clean for precise hole drilling

  • Catheter drilling guides change easily and accurately for easy set-up

  • Keyless drill chuck allows for fast and easy drill changes

  • Drill depth setting to within .001”

Commonly Used Materials

  • Teflon® PTFE
  • Teflon® FAP
  • Silicone
  • Polyimide
  • Pebax®
  • PEEK
  • Polyurethane
  • PVC (vinyl)
  • TPE
  • PET
  • Polycarbonate
  • Acrylic
  • Polyethylene
  • Latex andnatural rubber
  • Nylon 6 and small diameter nylon 12
  • Commonly Used Materials

    • Spindle speed: 0 – 4,000rpm
    • Drill depth setting resolution: .001” (.025mm)
    • Drill chuck runout: .0002” (.005mm) TIR
    • Drill chuck: .125” (3.17mm) diameter
    • Power: 110 VAC at 50/60Hz
    • Air: 30-120psi
    • Dimensions: 12” x 10” x 16″