Stent Crimping Machine - CR-60-HC

The CR-60-HC Stent Crimping Machine is developed for the crimping of balloon expandable bio absorbable stents.

Stent and balloon positioning outside of crimper head.
Crimp head can be heated (max.80 °C) and cooled (min.10 °C) in the process cycle.
Inflation and deflation system to create high stent retention values.
PLC controlled system.
The CR-60-HC is built according to the MPT Europe BV high quality standards, resulting in a stable and robust design with minimal cost of ownership.
A hub-connector is available for inflation and deflation of the product during the crimping cycle to achieve better retention.
6.5“ full color touch screen user interface for access to the machine parameters.

Stent crimping length	60 mm crimp head. Maximum 45 mm length stents
Stent type	Biopolymer stents
Maximum diameter loading	15 mm (optionally larger sizes possible)
Minimum closing diameter	0.2 mm (software limit)
Temperature range	10 °C – 80 °C
Crimp head control	Stepper controlled position & force measurement
Diameter accuracy	+/- 0.02 mm @ 100 N
Maximum crimp force	300 N radial
Crimping speeds	0.1 mm/s – 10 mm/s
Inflation / Deflation	6 bar max. inflation / -0.8 bar deflation
Stent positioning	Outside the crimp head (manually / optically)
GUI	6.5” colour touch panel
Control software	Recipe based Password levels (operator, engineer, calibrator) Remote support option Data logging with ethernet possible
Ethernet	1x
USB	NA
Required air pressure	7 bar minimum
Power supply	240 VAC / 1.2 kW

Let’s Build Something Together.